The optical fiber laser marking machine is made of ytterbium doped double clad fiber as the laser medium, so that the high power fiber laser can get the beam output near the diffraction limit. The optical fiber laser is used as the base film output. The focusing spot diameter is 10 microns, and the laser beam light path is controlled by the computer to control the high-speed scanning mirror to change the light path of the laser beam. Mark. Laser marking is not force and non-contact. It has little effect on the quality of the product. After marking, the font quality is stronger.
It has not been said that the radiation of laser marking machine affects human health, but because it is used in industrial production, if it is pregnant, there is no more contact. In fact, we live a lot of electrical appliances, such as computers, microwave ovens, electromagnetic furnace and so on to produce radiation, but leaving a certain distance, the electromagnetic radiation rate will decrease sharply. In order to ensure the health of the next generation, try to leave a distance in the operation of these electrical appliances, the mother's words, do not use these appliances.
Laser marking machineThe laser used belongs to the 4 kind of laser, and its output laser is invisible infrared light. Even in the case of partial focus, it may cause three degree burns. The beam of laser output contains visible and invisible radiation, which is harmful to the human eye. Eyes or skin should be avoided to be exposed to direct laser beams or scattered radiation. Before operation or use oflaser marking machine, all personnel around the equipment must use the special safety protection device for it. In case of accidental laser radiation or scattering.
客服 
Pay attention to the official WeChat
